• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Fuel line clips to body
Another question from me today.... I installed a complete new brake and fuel system over weekend to my project. I used an 3/8 aluminum fuel tube from tank. I make it connect to body at the rear close to the leaf spring bolt and in front on the torque box. Is there any other connection in between and where ? I feel the line is quite loose in apx 5 ft length. Unfortunately I did not take pictures of this section of fuel line while I was disassembling the car 3 years ago.... Any picture of this will help. Thanks for help.
Your in luck. Just took mine out last week on my 73. It's about 9 feet long so forgive the picture. The end with the blue tape is where it goes through the panel behind the shock tower. Of course you know where the clip is at the tourque box. On the 57 inch strait peice (from bend to bend)there is one at 14 1/2" at the center (This one was not a bolted clip but a clamp that has the pin in the center you push to tighten into a small hole) and another clamp at 53 1/2 at the center. on the bends at the rear there was 1 where the line changes to rubber.

[Image: 2rr7aiv.png]

Just cruising along minding our own business when BAM!!! The LAWS show up.
Thanks man , really appreciate this... For the clamp in the straight line at 14 1/2 position, is it attached with a screw to the floor ? I can't recall as the old floors are in the garbage and new ones has no hole drilled.

This is my old line which I saved and fabricated new one.

[Image: DSCN3301.JPG]http:
No, It's more like the clips that hold wiring but metal. It is barbed and has a pin in the center that once you place the barbs through the hole, you press the pin in and it spreads it (remember when I got it off thinking "Where am I going to find that?"). Only one on the line and if you don't still have it. I'm sure a clip and screw will work. Was probably for minimal floor penetration so you could bolt it through the floor to clip with a small flat headed or counter sunkheaded style bolt and nut from the floor side so you it doesn't work it's way through the underlayment and carpet

[Image: 2rr7aiv.png]

Just cruising along minding our own business when BAM!!! The LAWS show up.
Share Thread:  

Possibly Related Threads...
Thread Author Replies Views Last Post
  vacumn line and thermal switch naa10104 3 204 07-09-2018, 07:04 PM
Last Post: naa10104
  No fuel can't start. mweeps 1 222 05-19-2018, 11:38 AM
Last Post: Don C
  fuel sending unit pedstagn71 1 156 05-13-2018, 04:44 PM
Last Post: Don C
  doo rpanel clips SteveO_71 3 264 05-07-2018, 07:14 AM
Last Post: SteveO_71
runninpony Fuel Vapor Canister NOT A T5 3 290 04-01-2018, 06:11 AM
Last Post: NOT A T5
  '73 fuel tank removal scottyrocks 8 602 03-20-2018, 08:46 AM
Last Post: Stanglover
runninpony Seat Track Clips/Gliders NOT A T5 3 303 01-30-2018, 05:50 AM
Last Post: NOT A T5
  Ignition cylinder lock spring clips? Omie01 1 325 12-18-2017, 04:36 PM
Last Post: secluff

Users browsing this thread: 1 Guest(s)