• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Good morning members,
I am about to order the weatherstrip for the quarter windows.
[Image: H91l7sGBKtYY.jpg]

I would like to get some tips about the proper way of doing it.
this is what i am working with.
[Image: 9-15158.jpg]
[Image: 9-15162.jpg]
[Image: 9-15161.jpg]
Now I plan to use 3M strip chaulk between the glass and the metal piece (I dont know what the original material was)
To me the hard part seems to be taking off the old weatherstrip piece and install the new one.
Thank you all in advance for all the help.

[Image: 241120n.png]
If I remember correctly, there are two 1 1/2 long tabs at the bottom of the channel that have to be carefully pried open a bit to release the grip on the rubber seal. Hit with some silicone spray and it should come out the top. Reverse the process for installation. I saw no need for any kind of glue, it is a tight fit. Chuck
Share Thread:  

Possibly Related Threads...
Thread Author Replies Views Last Post
  73 door window noise after rebuild samckay 0 168 04-22-2018, 12:29 PM
Last Post: samckay
  Window Trim Cleaning, Bright metal andy72 4 351 04-22-2018, 10:32 AM
Last Post: Carolina_Mountain_Mustangs
  Quarter Windows - Rolling down timsweet 5 861 03-30-2018, 11:54 PM
Last Post: mach71351c
  73' rear quarter window electric switch location? frank@quadrachiropractic.com 2 340 03-26-2018, 12:31 AM
Last Post: Carolina_Mountain_Mustangs
runninpony Tinted Quarter Windows NOT A T5 3 518 12-31-2017, 12:27 PM
Last Post: NOT A T5
  Coupe Quarter Outer weatherstrip mustang7173 12 1,354 12-19-2017, 08:33 AM
Last Post: mustang7173
  1971 Power Window master bezel removal mwilson7 6 811 08-29-2017, 08:13 AM
Last Post: Carolina_Mountain_Mustangs
  Window anti rattle clip 73429mach 5 995 07-14-2017, 01:15 AM
Last Post: 73429mach

Users browsing this thread: 1 Guest(s)