• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Correct 351C Power Steering Hoses?
#1
Hey all, 

I’m looking to buy new power steering hoses for a 351C, and I haven’t had any luck in finding some, wondering if anyone had any links or knows any keywords i should look up? Just reply below, thanks!!!!
  Reply
#2
Rock Auto has a good selection of hoses if you're not needing "concourse" style repops with the Ford part #s.

Pressure hose

https://www.rockauto.com/en/catalog/ford...+hose,7320

Return hose

https://www.rockauto.com/en/catalog/ford...+hose,7324


  Reply
#3
Whatever you do don’t buy Scott Drake hoses, they are junk! Had a relatively new one blow apart on me when I was making a turn. Almost hit another car and had atf all over my perfectly clean engine compartment.  Angry

run_horse Run Horse Run!
John 72 Q Code
  Reply
#4
Keep in mind if you are looking for the adapter from the pump to the pressure line (pictured below) they do not make them. You can try to find a used one or make your own.


[Image: 1349280032_v.jpg]

'73 Grandé H Code. Headman long tube headers, T-5 Transmission, 3.70 Traclok, Lowered 1" all around, Aussie 2v heads w/ 2.19 intake, 1.71 exhaust, screw in studs, full roller cam 608/612 lift 280/281 duration LSA 112, 750 CFM double pumper, Holley Street Dominator intake.

'73 F code convertible. Bright red. Needs total restore. (IE HOT MESS)

- Jason
[+] 1 user Likes 73pony's post
  Reply
#5
I bought my replacement lines from Autozone. Wasn’t worried about getting the Ford part number for the replacement. They have worked great so far.
  Reply
#6
And the metal line that 73pony has pictured was missing on my car. Someone had used a high pressure line off of a 250, which will work without the metal extension tube, but rubs against the master cylinder.

The metal tube that is pictured, I ordered from West Coast Cougar. They sell good, used, hard to find parts. I highly recommend them.


Sent from my iPhone using Tapatalk
  Reply
#7
(08-09-2018, 11:31 PM)street rod mach 1 Wrote: Hey all, 

I’m looking to buy new power steering hoses for a 351C, and I haven’t had any luck in finding some, wondering if anyone had any links or knows any keywords i should look up? Just reply below, thanks!!!!

 71's are the long pressure hose that goes up on top of the shock tower brace. 72 and 3's are the short hose. But that may not be a concern to you. I got mine form NPD, but no idea who made them. Had no issues thus far, maybe I should check out what is available elsewhere.
Geoff


Attached Files Thumbnail(s)
   
  Reply
#8
runninpony 
Bad Scott Drake parts again, who would have known? Just ill fitting JUNK!

Old Mustangs never die, they just go faster!
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
Wrench Help! Not sure how to mount the power steering pump 351W Ballaratcastle 12 285 Yesterday, 09:17 AM
Last Post: Hemikiller
  1973 351C vacuum lines and eventual other questions scottyrocks 14 275 08-12-2018, 11:53 AM
Last Post: Don C
  No Power After Putting Engine Back In VasiliBrown 5 243 07-31-2018, 02:52 PM
Last Post: delawarebill
  351c cam lobe ID. Have to measure lift Ryunker 8 288 07-23-2018, 06:04 PM
Last Post: Ryunker
  351c vs 351w Tnfastbk 11 5,884 07-14-2018, 02:57 AM
Last Post: MissingNo.
  Holley Sniper on a 351c Fabrice 45 5,396 07-01-2018, 01:54 PM
Last Post: Fabrice
  1971 351c m-code engine Meyer 8 482 06-23-2018, 06:14 PM
Last Post: keiths71
  351C M-Code engine Timing issue! Meyer 25 859 06-17-2018, 08:41 AM
Last Post: Stanglover



Users browsing this thread: 1 Guest(s)