• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
crossmember drawing
#1
Here is a good drawing


Attached Files Thumbnail(s)
   
  Reply
#2
Great drawing! There is an obvious difference between the two crossmembers.



Mike AKA Ole Pony & Rare Pony

Our current Mustang garage/driveway
1973 Mustang Convert - Bought in 1974 - Still have it!
2004 Mach 1 Oxford White Auto, Bought Sept 06


[Image: 20180127_082009.jpg]

upload a photo on internet




  Reply
#3
Okay now look at this crossmember part number D1ZZ-6A023-B

[Image: 25sre6s.jpg]

It's unique in that it has 3 center mounting holes and a center reinforced plate

Perogie has one for sale and says it's specific to the 7173 Stang w/ 4sp toploader. 429Megasite also says this part number crossmember is for the 71Mustang, but they don't have a picture of it and only a drawing like Roys but the drawing shows a 2 hole crossmember like the ones used on the 1967-70 stangs.
I was told by a few now that the correct crossmember are in fact the ones used on the 67-70 so who's using this 2 holed crossmember and can confirm for sure which is the correct application for a 4sp toploader, 351C equipped 1971 Mustang?
Thanks!

  Reply
#4
I dont know if mine has 2 or 3
  Reply
#5
Tnfastbk;23873 Wrote:I dont know if mine has 2 or 3
okie dokie!
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  C4 transmission crossmember for 73 Convertible Ballaratcastle 8 226 07-08-2018, 05:45 AM
Last Post: Ballaratcastle
Wrench exhaust system for 351 4V photo or drawing John J 10 1,683 07-27-2017, 09:10 PM
Last Post: John J
  C4 Crossmember boilermaster 8 1,199 10-02-2015, 02:51 PM
Last Post: boilermaster
  Trans Crossmember: FMX vs C6 afeng79 6 2,076 04-03-2015, 04:17 AM
Last Post: TommyK
  C4 Crossmember Question japrine 5 920 04-12-2014, 07:16 AM
Last Post: IA Rider
  Transmission crossmember & linkage Robnbama 4 692 12-01-2013, 12:16 PM
Last Post: Robnbama
  Crossmember help Tnfastbk 4 1,760 11-25-2010, 09:12 AM
Last Post: Tnfastbk



Users browsing this thread: 1 Guest(s)