• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
1-2 shift too soon
#1
On take off trans upshifts to 2nd gear way too soon, like 10mph. Is the vacuum modulator adjustable?

Alan L

[Image: 1_30_09_13_10_12_32.png]
Alan L
  Reply
#2
What tranny? Also, has the modulator been recently replaced? They can be VERY sensitive to the wrong modulator (we found that out the hard way with my 71 FMX tranny). Finally, there are at least 2 lengths of vacuum hose, one from manifold to the line, one from the line to the modulator. Are they in good shape?
  Reply
#3
Alot of modulators are adjustable, it will have a flat head screw inside the vacuum line side of the modulator, one or two full turns of the modulator screw will make a huge difference, turn it out for a faster shift in for a longer shift.

It may be hard to get to the screw you need a small driver and the cross member gets in the way, if you pull the modulator out to adjust it, you will start dumping trans fluid like crazy on your floor.

The modulator does control the shift I adjusted mine in because the shift was too fast when I stomped on it. 2 turns in on the screw made the shift perfect.
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  C6 Transmission shift position timsweet 4 166 08-06-2018, 06:19 AM
Last Post: Hemikiller
  AOD Shift Linkage for my 1973. timsweet 1 236 07-20-2018, 09:50 PM
Last Post: timsweet
  Fmx shift shaft seal replacement Tucaz520 11 606 06-29-2018, 05:13 AM
Last Post: summerboy
  Replace correct C6 shift lever thomas1984 11 5,748 07-02-2015, 03:52 AM
Last Post: thomas1984
  Adjusting shift points on a C6 Jim and Jutta 31 10,508 06-18-2015, 07:41 PM
Last Post: Jim and Jutta
  Shift rod to Cable conversion afeng79 3 937 04-08-2015, 03:27 PM
Last Post: cazsper
  FMX out of nowhere the shift pattern is all flipped DattPaletero 11 3,596 09-28-2014, 08:58 PM
Last Post: DattPaletero
  HOW TO 4R70W SHIFT LINKAGE Qcode351mach 7 4,554 08-25-2014, 08:52 AM
Last Post: InjectedMach



Users browsing this thread: 1 Guest(s)