• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Windshield Washer Hose Clips
#1
Does anyone know what kind of clips hold the washer hose up to the bottom of the hood? Right now, the hoses are just hanging there on the Mach1 but I remember them being clipped up on the coupe. (Unfortunately, I can't get to the back side of the coupe hood right now! LOL)

[Image: 1gq8uo.png]
1971 Mach 1 - 306cid/C4 Bright Yellow
"Just relax, I've got a friend named Felix who can fix anything!" ~James Bond
  Reply
#2
i could never find the correct ones. if you find them lmk
  Reply
#3
Here's what I have. They are half moon shaped 1/2 wide about 1 1/2 inches long taped to the hose and push in the holes.


Attached Files
.jpg   IMG_0705-1.jpg (Size: 194.38 KB / Downloads: 77)
  Reply
#4
hey awesome that is a really good picture of one.

none of them are ever posted for people to see what they look like.


well because of the really great picture i realized they are similar to the engine wire harness clips that go into the lower frame when you install the main engine electrical harness, however i don't have any more since i re-used my originals and another set from a second harness i used as a donor to repair mine.

however i looked on ebay and found this
http://cgi.ebay.com/ebaymotors/ws/eBayIS...0419238877

its very similar to the original intent of the OEM clip. So i ordered a set and if they fit the hole in the hood then i can tape up my washer hose to them and have it look near original instead of the wire loom clips i'm using now.

when i get them i'll report if they fit.
  Reply
#5
Nice find! I may have to get some of those clips, but for right now, I used some small "P" clamps and plastic firewall fasteners (Technical name: Christmas Tree Clip, LOL) to hang them up. Seems to work fine but definitely not original.

[Image: 1gq8uo.png]
1971 Mach 1 - 306cid/C4 Bright Yellow
"Just relax, I've got a friend named Felix who can fix anything!" ~James Bond
  Reply
#6
The ebay clips look like they should work. Heres what happens when you don't work on your car enough. Rose bush growing out of my hood.Big Grin


Attached Files Thumbnail(s)
   
  Reply
#7
Well the clips came today, had to drill the washer clip hole in the hood slightly larger to 5/16"
And then it fit like a glove, taped the washer lines just like in machman's picture, and hey it works looks stockish beter then the wiring clips I had before and it's more secure I'll take a pic of it
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
runninpony Cowl mounted washer nozzle NOT A T5 8 290 06-24-2018, 07:54 PM
Last Post: NOT A T5
  New Wiper-Washer Bezel secluff 1 499 10-24-2017, 11:12 PM
Last Post: gpierce
  Vacuum Hose for AC Through Firewall Billpetsch 8 726 09-29-2017, 11:29 AM
Last Post: Carolina_Mountain_Mustangs
  Windshield Install Three Ponies 13 1,494 09-28-2017, 12:27 PM
Last Post: Omie01
  Windshield wiper restoration Omie01 2 417 09-19-2017, 10:30 AM
Last Post: Omie01
  Honeycomb grille between windshield and hood Pegleg 13 1,049 07-12-2017, 02:33 AM
Last Post: Pegleg
  1972 fastback package tray clips Danno 3 483 02-17-2017, 05:42 AM
Last Post: piper62j
  headliner installed, questions before windshield install 87fox72mach 8 802 02-07-2017, 04:57 PM
Last Post: 72HCODE



Users browsing this thread: 1 Guest(s)