• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Any Advice on Engine Stands
#1
I plan on rebuilding a 72 351C engine to transplant into my 73 Vert 6 cylinder. I have a nice Torin Big Red 2 ton engine hoist but need an engine stand. I understand the 351 C weights about 600 pounds. The local Auto Zone sells THIS ONE for $70.00 and is in stock, but I think I'd rather find a folding version.

Any comments/suggestions about the quality or versatility of different stands.



Mike AKA Ole Pony & Rare Pony

Our current Mustang garage/driveway
1973 Mustang Convert - Bought in 1974 - Still have it!
2004 Mach 1 Oxford White Auto, Bought Sept 06


[Image: 20180127_082009.jpg]

upload a photo on internet




  Reply
#2
I have 2 that I found on sale at Harbor freight. Paid about $40 each, they are rated for "rated" for 1000 lbs but I wouldnt dare go near that but they hold the 2 spare clevelands jsut fine, and rebuilt one on it without issues.
I get flyers with it on sale from time to time, or they have 20 % coupons in many magazines like Car craft and Modified Mustangs
Whichever you decide on get one with 4 wheels, there are some 3 wheelers that dont roll very well.
http://www.harborfreight.com/1000-lb-cap...32916.html




[Image: mustangnight010.jpg]
1972 Mustang Convertible 351C 4V
1966 Ford Galaxie 7 litre-4speed

Jorge
  Reply
#3
I agree with Jorgem. I have two that I store clevelands on as well. One I bought years ago on sale. It is 3 wheeled and has difficulty supporting the engine. It drops down in front to the degree that I put a 2x4 support under the front of the block. I have the second one on a stand from Harbor Freight and it works great. It is yellow and rated at 1000lbs with the four casters. I bought it about 6 months ago when I pulled the cleveland 4 barrel out of my car. I know Harbor Freight also has a folding one, just can't comment on its quality. I always use the 20% off coupons I get in Mustang Monthly and other magazines. We have a store here in Memphis and that makes getting things alot better than shipping. I would recommend the Harbor Freight option as well.

BKDunha
72 Mach 1 H-Code (Concourse driven restoration)
67 S-Code Factory GT with 4-Spd

68 Mercury Cyclone (Pro-Street project)
  Reply
#4
Mine from Harbour Freight also, 1000lb rating $39.00 works fine but alittle hard to move around when loaded. looked at 1500lb one but wheels smaller so went for larger wheels

Alan L

[Image: 1_30_09_13_10_12_32.png]
Alan L
  Reply
#5
Also Harbor Freight, been sitting there for about a year now with no apparent issues... I did forget to grease the sleeve, so it doesn't turn very well.
  Reply
#6
whatever you go with make sure on the four wheels. Mine was on a three wheeler and scared the hell out of me every time I moved it.
  Reply
#7
Tnfastbk;18718 Wrote:whatever you go with make sure on the four wheels. Mine was on a three wheeler and scared the hell out of me every time I moved it.

X2

Doc

[Image: 6y14ea.jpg]

Project started 8-7-10
Completed: All new suspension, rebuilt 351C H Code bored .030 over with mild cam and intake, new 3.50 TracLok, custom exhaust system
Current "mini-project": interior upgrade Undecided
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Getting the engine out of the car... Régis 30 567 08-10-2018, 12:57 PM
Last Post: Don C
  Engine Balance 73' mach 1 9 323 08-09-2018, 12:55 PM
Last Post: c9zx
  No Power After Putting Engine Back In VasiliBrown 5 243 07-31-2018, 02:52 PM
Last Post: delawarebill
  Install Engine, Transmission, and Headers VasiliBrown 15 590 07-28-2018, 05:57 PM
Last Post: VasiliBrown
  Engine buffs: why do our engines need to warm up? Vinnie 21 813 07-10-2018, 06:00 PM
Last Post: Blue Mach 429 CJ
  71-73 Engine Performance Don C 12 1,505 07-10-2018, 03:21 PM
Last Post: Don C
runninpony Engine and Transmission NOT A T5 8 338 07-09-2018, 11:01 PM
Last Post: BeerDontCount
  Need help identifying engine Brooks425 2 288 06-24-2018, 11:15 AM
Last Post: Brooks425



Users browsing this thread: 1 Guest(s)