• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Ported vacuum switch hookup
#1
71 351C. Anybody know what port goes to what accessory on the ported vacuum switch? The middle port goes to the distributor. The top and bottom ports go to an intake manifold port and to a timed vacuum port on the carb (Holley 4150). But, I don't which of the 2 ports goes to which place.
  Reply
#2
oh man its been a while if i remember correctly.
the top port goes to the timed vacuum.
and the bottom goes to full manifold vacuum.


you can check it also. with the engine off and the valve cold, take a piece of vacuum hose and place it on the center port and blow air will come out of the Timed vacuum port, the full manifold port will only come on when the engine is overheating. you can test that also, place the valve in boiling water and let the valve open then blow through the center and now the bottom port should be working with the timed port shut off.
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  A/C vacuum actuator motors Pegleg 16 425 07-14-2018, 06:32 PM
Last Post: rackerm
  vacumn line and thermal switch naa10104 3 207 07-09-2018, 07:04 PM
Last Post: naa10104
  Neutral safety switch location jowens1126 9 240 07-08-2018, 11:56 AM
Last Post: jowens1126
  Neutral Safety Switch mudbilly 18 533 07-03-2018, 05:08 PM
Last Post: mudbilly
  Vacuum hose woes Helicopter 2 316 05-27-2018, 12:33 PM
Last Post: Don C
  Wiper Switch Removal mudbilly 8 403 05-25-2018, 07:07 PM
Last Post: mudbilly
  Vacuum hoses rudyck 4 341 04-20-2018, 12:19 PM
Last Post: Hemikiller
  Transmission Neutral Safety Switch CJ MACH 1 2 374 03-18-2018, 09:36 AM
Last Post: c9zx



Users browsing this thread: 1 Guest(s)