• 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Carbon Fiber Door Panels
#1
I've been thinking and I've decided I'm gonna do it. Since the standard interior door panels are just flat cardboard anyways, I figure I could cut out a door panel with carbon fiber. I think It would be a pretty cool custom/racecar look. Just gotta buy a sheet of carbon fiber like this.


http://www.carbonmods.co.uk/Products/Wet...CS1MM.aspx



It would be similar to this car.

[Image: DSC_69381196960498.jpg]


[Image: 25rnz1y.jpg]

~Buddy
  Reply
#2
GO for it. Idea
  Reply
#3
THAT is what "rodding" has always been about - - making your car suit YOUR desires and making it BETTER in your mind.

Sounds like a GREAT approach to me.

BT

Do the RIGHT thing.
  Reply
#4
Wow - at $425-ish per door, I think I'll stick with repro door panels.

But good luck nonetheless. I think it'll be cool regardless. I'm planning on replacing the fake woodgrain with carbon fiber skin - probably just get a nice sheet of vinyl though.

Eric

[Image: mach1sig2.gif]
  Reply
#5
Mister 4x4;11960 Wrote:Wow - at $425-ish per door, I think I'll stick with repro door panels.

But good luck nonetheless. I think it'll be cool regardless. I'm planning on replacing the fake woodgrain with carbon fiber skin - probably just get a nice sheet of vinyl though.

Check out the pics in my garage of the carbon fiber and the brushed aluminum door panel inserts
http://www.atlantahydroimaging.com/
  Reply
#6
Tnfastbk;12001 Wrote:
Mister 4x4;11960 Wrote:Wow - at $425-ish per door, I think I'll stick with repro door panels.

But good luck nonetheless. I think it'll be cool regardless. I'm planning on replacing the fake woodgrain with carbon fiber skin - probably just get a nice sheet of vinyl though.

Check out the pics in my garage of the carbon fiber and the brushed aluminum door panel inserts
http://www.atlantahydroimaging.com/

hydro imaging is so cool

Eric


[Image: a58hgh.jpg]
DRIVE IT DON'T STORE IT!
  Reply
#7
Tnfastbk;12001 Wrote:Check out the pics in my garage of the carbon fiber and the brushed aluminum door panel inserts
http://www.atlantahydroimaging.com/

So, you had the center console hydro-imaged? Sweet!! I like the look of the camera case finish on the other pieces though - it's just the fake wood grain that bugs me.

Here's what I'm thinking about: http://www.carbonfiberfilm.com/ I'd thought about having the hockey stripes and 'Mach 1' decals cut out of this stuff, then applying to the hood as well - but it doesn't last so long out in the elements (I'd be reapplying the stuff every couple years or so). But should be fine for many years on internal pieces. I've got a buddy in San Antonio doing this to the roof of his 350Z, so I guess I'll keep tabs on that for awhile.

Watch the videos and you'll see just how easy to apply and durable this stuff is. I just wish sun-fade wouldn't be such a problem.


Eric

[Image: mach1sig2.gif]
  Reply
#8
Mister 4x4;12051 Wrote:
Tnfastbk;12001 Wrote:Check out the pics in my garage of the carbon fiber and the brushed aluminum door panel inserts
http://www.atlantahydroimaging.com/

So, you had the center console hydro-imaged? Sweet!! I like the look of the camera case finish on the other pieces though - it's just the fake wood grain that bugs me.

Here's what I'm thinking about: http://www.carbonfiberfilm.com/ I'd thought about having the hockey stripes and 'Mach 1' decals cut out of this stuff, then applying to the hood as well - but it doesn't last so long out in the elements (I'd be reapplying the stuff every couple years or so). But should be fine for many years on internal pieces. I've got a buddy in San Antonio doing this to the roof of his 350Z, so I guess I'll keep tabs on that for awhile.

Watch the videos and you'll see just how easy to apply and durable this stuff is. I just wish sun-fade wouldn't be such a problem.

Cool pretty neat stuff yeah I did not like the wood grain either, but thats what makes them our cars is you make it your own.
  Reply
#9
runninpony 
I hydro dipped on graphics on my door insert. Got a kit with 5 or 6 different rolls for around $100.00. I used to dip gun parts and transferred that over to car parts. Waiting on new door panels to put on these scales on my cobra LOL.


Attached Files
.jpg   IMG_2244SM.jpg (Size: 56.39 KB / Downloads: 182)
  Reply
#10
Sweet!

We have a place that does hydro-imaging here in San Angelo, but they want A LOT of money for it (I'm not saying it's not worth it... just not to me).

I got the 3M Di-Noc and covered my pieces shortly before the car show last October... it seemed to be a big hit. I'll be sure to get some better pics soon.

Eric

[Image: mach1sig2.gif]
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  door guts Copestang 1 182 07-24-2018, 06:35 AM
Last Post: mustang7173
  Door Jamb Vent Covers ITMike5.0 7 399 05-03-2018, 04:09 PM
Last Post: Mikes73
  73 door window noise after rebuild samckay 0 172 04-22-2018, 12:29 PM
Last Post: samckay
  Deluxe Door Woodgrain Insert andy72 29 1,391 04-21-2018, 06:39 PM
Last Post: andy72
  Best deluxe Replacement Door Panels Stanglover 29 1,627 03-07-2018, 08:47 AM
Last Post: Stanglover
  Trap door question Danno 0 278 03-06-2018, 06:48 PM
Last Post: Danno
  Mustang II door panel Studdley 5 438 03-03-2018, 08:46 PM
Last Post: secluff
  Stabilizer Door Glass mustang7173 22 3,499 02-21-2018, 07:34 AM
Last Post: mustang7173



Users browsing this thread: 1 Guest(s)