• 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Boss 351 Valve Covers for sale on Ebay
#1
Very Nice set of valve covers for a 1971 Boss 351 Mustang. Listed on ebay now. I paid too much for them, no doubt, and I pulled them off a nice M Code Mach 1 as the car was simply too original to use them on that car. They did not leak a single drop that I could see while on the car. (I simply repainted the original valve covers and used them instead on the Mach 1). One of the covers is missing the spark plug wire harness clip. It is (was) attached with a single screw, and should not be hard to replace, as it was used on lots of other covers I would think. No pitting, No corrosion, etc. I set the minimum bid at $400....I paid nearly twice that! Thanks for your interest.


2014 F150

  Reply
#2
Nice, wish I had a Boss 351 to go with those.

Jim

Jim

M code 71 Mach 1, 351 4V Cleveland, Ram Air (not factory), C6 Trans, 3.5 rear
  Reply
#3
Definitely original Boss 351 valve covers (also factory correct for Boss 302).

The covers have non-stock stickers added and have been polished. For originality - easily remedied.
Too many of these covers were over tightened and cracked around the mounting screw areas.
Good that they don't leak.

Best of luck on your sale.

Ray

1971 Boss 351  
1972 Q code 4 speed convertible 
1971 Mustang Sportsroof  351-2V FMX 
1973 Mach 1 (parts car)
  Reply
#4
For use on a boss 302's and some early 351's you need the srcew in oil dripper fingers / baffles
  Reply
#5
OMS;130923 Wrote:For use on a boss 302's and some early 351's you need the srcew in oil dripper fingers / baffles

Don, Are those dripper fingers available anywhere? I thought I saw them being reproduced.

kcmash
  Reply
#6
Do you have a link to the auction? I can't seem to find it...

---
Mike
  Reply
#7
kcmash;250237 Wrote:
OMS;130923 Wrote:For use on a boss 302's and some early 351's you need the srcew in oil dripper fingers / baffles

Don, Are those dripper fingers available anywhere? I thought I saw them being reproduced.

kcmash

Sorry, I'm not sure if they are being made - I do not have them

Ohio Mustang Supply
440-949-2556

[Image: oms_sig_banner.jpg]
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  1971 mustang coupe for sale 71coupe 4 527 08-09-2018, 01:43 PM
Last Post: 71coupe
  For Sale: 1973 Deluxe Rear Bumper with Bumper Guards OLE PONY 5 720 08-01-2018, 05:21 PM
Last Post: OLE PONY
  ONE OF MY PROJECTS FOR SALE! kevken1959 3 376 07-09-2018, 04:17 PM
Last Post: chris.sima
  1-pair BARE Closed chamber 351 2V Aussie Heads 351VENOM 8 1,338 07-01-2018, 01:35 PM
Last Post: Antmcontest
  1971 D1AE GA Ford 351 Cleveland 4v heads 428kid 4 519 06-17-2018, 04:06 PM
Last Post: 428kid
  '71 Vert For Sale wrshog 2 276 06-12-2018, 10:44 AM
Last Post: mach71351c
  351 Cleveland 2v and C6 33,00 original miles. 3514boltstang 1 318 06-05-2018, 09:50 PM
Last Post: josephqatarcarguy
  1973 351 cobra jet Luc2121 2 350 05-22-2018, 01:51 PM
Last Post: Dozz302



Users browsing this thread: 1 Guest(s)