• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Fuel Filler Neck
#1
Hello All

I have a problem
Tring to install my fuel tank filler neck and from the looks of it
it need a metal ring on the inside for the screws to mount the neck
to the rear panel is this corect or am i missing something
i got my stang as a baskett case and did not git a tank or filler
i cant seem to find any pics of the inside back part of the filler
any help will be apprecitaed

Thanks
[/size][/font]

How fast is the speed of DARK?
  Reply
#2
It slides in to the tail light panel from the outside... I think that's what you're asking.

[Image: 2cossj6.png]
97 F150: wrecked, 96 Dodge 4x4: blown motor / donated to the base
88 Suburban 4x4 355 cid 8 inch lift: sold, 95 Celica 5 speed : sold
68 F750 391 cid : sold,  96 F350 7.3 diesel dually : sold
86 Chevy 1500 305 cid c1500: sold, 73 Mustang mach 1 466 cid 5 speed : under construction
89 F350 4x4 cummins swap : sold, 64 Dodge d600: gone
00 Excursion: traded, 72 Mustang mach 1 302: scrapped
73 Mustang coupe: scrapped, 73 ranchero gt
06 Honda crf 450x : sold, 04 Honda vtx 1800
88 Bronco xlt lariat: sold, 76 Charger: traded
95 F350 4x4: sold , 91 Crown Victoria 302: sold
02 Dakota: traded, 96 f250 powerstroke: parts truck
87 f700, 98 e350 powerstroke: sold
03 land rover: traded, 95 f350 dually: part out
95 f350 dually: traded, 94 f150 4x4: traded
97 f250: sold, 76 Maverick 302: sold
91 240sx rb25: sold, 86 firebird: sold
86 Trans Am: sold, 88 westernstar: sold
89 dodge d350: sold, 2000 Dakota 4x4: sold  
84 f350 3+3: sold, 90 bronco: partout
67 catalina, 64 chevy c60
64 jeep j200, 74 corvette stingray
79 Lincoln mark V, 2013 f350: goldilocks
  Reply
#3
I just changed mine today. Here is a photo from the outside of the tail light panel and a photo of the filler neck. The filler neck fits in from the outside and attaches to the tail light panel with 5 coarse threaded Phillips head sheet metal screws onto the cork gasket. There is no backing ring on the tail light panel for the screws.
[Image: n39ilz.jpg]
[Image: 2lkr69t.jpg]
Here is a photo from inside the trunk with the fuel filler neck removed:
[Image: 2wlvsc8.jpg]
Here is a photo of the rubber gasket that goes on the filler neck inside the trunk:
[Image: 2uom7lv.jpg]
There is also a rubber gasket that goes on the fuel tank where is mates to the fuel filler neck. Go ahead and get all new rubber gaskets for a good seal. Let me know if you need more pics or anything. Mine is in pieces right now waiting on new parts.

Steve
73 Mach 1 Blue Glow/Argent Q Code C6 Auto
73 Mach 1 Blue Glow/Argent Q Code 4 Speed
  Reply
#4
Steve73QMach1;130273 Wrote:I just changed mine today. Here is a photo from the outside of the tail light panel and a photo of the filler neck. The filler neck fits in from the outside and attaches to the tail light panel with 5 coarse threaded Phillips head sheet metal screws onto the cork gasket. There is no backing ring on the tail light panel for the screws.
[Image: n39ilz.jpg]
[Image: 2lkr69t.jpg]
Here is a photo from inside the trunk with the fuel filler neck removed:
[Image: 2wlvsc8.jpg]
Here is a photo of the rubber gasket that goes on the filler neck inside the trunk:
[Image: 2uom7lv.jpg]
There is also a rubber gasket that goes on the fuel tank where is mates to the fuel filler neck. Go ahead and get all new rubber gaskets for a good seal. Let me know if you need more pics or anything. Mine is in pieces right now waiting on new parts.

Thanks for the info and pics
i saw thoes holes but they did not look like they
were threaded it must be a very large screw in there
i will try to look at it tomarow after the ford and shelby show
i am going to in tulsa,ok

How fast is the speed of DARK?
  Reply
#5
There are differant screws for flip cap VS twist on cap
You can see pics on my web site
Don

Item #F-301
70-71 GAS TANK FILLER NECK FASTENER KIT
Fuel tank filler neck with twist cap screw kit. Five pieces. Price: $3.00


Item #260
70-73 GAS TANK FILLER NECK SCREW KIT
5 Piece kit. Price: $1.50


Item #D1ZZ-9072
71-73 FILLER NECK TO GAS TANK SEAL
Reproduction filler neck to fuel tank seal. Obsolete from Ford, replaces part number D1ZZ-9072. Price: $19.95

Item #1054
71-73 GAS TANK BOLT KIT
Price: $3.00


Item #F-992
71-73 GAS TANK FILLER NECK SEAL FASTENER KIT
4 piece screw kit. Price: $3.00


No Picture Item #ST89
71-73 GAS TANK STRAPS, PAIR
Pair of fuel tank straps. Price: $42.95


Item #D1ZZ-9008
71-73 TRUNK FLOOR TO FILLER PIPE SEAL
Trunk floor to fuel tank filler pipe seal. Price: $21.95

Ohio Mustang Supply
440-949-2556

[Image: oms_sig_banner.jpg]
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Shift plate filler from wood digithead 7 738 05-09-2016, 06:42 AM
Last Post: Pastel Blue
bulb 3- Point Seat Belts w/o neck rash! EBSTANG 51 4,470 02-18-2016, 04:07 PM
Last Post: Jeff73Mach1
runninpony 71 - 73 Gas Filler Neck mustang7173 2 1,108 02-06-2015, 01:58 PM
Last Post: mustang7173
  Grille filler panel radiator cover. Please read for information mach1000 13 3,990 10-18-2014, 12:33 AM
Last Post: jbojo
  Trunk filler panels afeng79 5 1,108 05-15-2014, 03:02 AM
Last Post: Austin Vert
  Locking pop open fuel cap? cazsper 4 1,014 06-20-2013, 02:44 AM
Last Post: cazsper
  Another Paint/Filler question Jim and Jutta 18 2,406 08-29-2012, 08:00 PM
Last Post: Jim and Jutta
tach Fuel Gauge/Sending Unit Inop (Diagnose) hetrickw 11 1,881 06-23-2012, 07:55 PM
Last Post: Don65Stang



Users browsing this thread: 1 Guest(s)