• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Replacement R Code Carb
#1
Would a D3PF BA (D3ZZ-9510-E) work on a 72 R code? Not worried about concourse correct just want something to use for driving around and rebuild the Original Carb over the winter. I know it is a 73 part number and Motorcraft instead of Autolite. Just wanted to hear some opinions.
  Reply
#2
mweeps;130042 Wrote:Would a D3PF BA (D3ZZ-9510-E) work on a 72 R code? Not worried about concourse correct just want something to use for driving around and rebuild the Original Carb over the winter. I know it is a 73 part number and Motorcraft instead of Autolite. Just wanted to hear some opinions.

If it is a spread bore it should work fine.
  Reply
#3
It is a spread bore. The bore size says 1.25 what is the bore size on the R Code 4300-D?
  Reply
#4
mweeps;130058 Wrote:It is a spread bore. The bore size says 1.25 what is the bore size on the R Code 4300-D?

According to my little blue book the primary throttle bore for the D2ZF-GA, which is the R code carb is 1.56and the secondary throttle bore is 1.96. This is the same for all 4300D carbs. The venture diameter is 1.25 and the air flow CFM is 750. I hope this helps.
  Reply
#5
72 R Code;130085 Wrote:
mweeps;130058 Wrote:It is a spread bore. The bore size says 1.25 what is the bore size on the R Code 4300-D?

According to my little blue book the primary throttle bore for the D2ZF-GA, which is the R code carb is 1.56and the secondary throttle bore is 1.96. This is the same for all 4300D carbs. The venture diameter is 1.25 and the air flow CFM is 750. I hope this helps.

Do you know how the secondary side meters fuel to the engine, i see the one that i have has no booster.How about a little school call.
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  1973 351 H code vacuum routing Mikes73 6 4,455 08-10-2018, 05:12 PM
Last Post: scottyrocks
  1972 Q code new carb rugbyguytx 5 799 07-30-2018, 04:13 PM
Last Post: jpaz
  Fmx shift shaft seal replacement Tucaz520 11 646 06-29-2018, 05:13 AM
Last Post: summerboy
  1971 351c m-code engine Meyer 8 493 06-23-2018, 06:14 PM
Last Post: keiths71
  351C M-Code engine Timing issue! Meyer 25 861 06-17-2018, 08:41 AM
Last Post: Stanglover
  Sensor on vacuum line Q code John J 1 216 06-10-2018, 03:49 PM
Last Post: Don C
  Autolite 2100 Carb help Pegleg 3 417 05-22-2018, 05:33 PM
Last Post: Don C
nuke @#$$#@$@ Edelbrock Carb issue rugbyguytx 2 373 03-25-2018, 09:02 AM
Last Post: Stanglover



Users browsing this thread: 1 Guest(s)