• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
switch lights
#1
Just had to replace the windsreen wiper switch- actaully take the bad intermitent one out annd put the original one back in.

While doing so noticed that there appears to be a light bulb back there. Has never worked as long as I have had the car 20+ years. Also figure that the top up down switch, light switch and cell phone charger plug has these lights.

Any idea how one getss to these bulbs to replace tham and what kidn they are. I was unable to reach back to get them.
  Reply
#2
The easiest way I saw to get to them was to either pull the dash apart, or remove the switch from the dash to allow access from the underside. I don't remember the bulb size, but Sylvania has a bulb guide for our cars that should tell you

2013 Ford Focus SE Flex Fuel 5spd - Daily Driver
  Reply
#3
I've got a box of them in my glove box. I will check what the number is on the box
  Reply
#4
Usually #194 bayonet base bulbs. Your owners manual will also have the bulb types listed.
  Reply
#5
I know on mine I used 1895 bulbs. If you need one for the console selector (auto Trans) it is a 1445 bulb
  Reply
#6
Yeah, and they look better with LEDs.

[Image: IMG_0103.jpg]

[Image: IMG_0102.jpg]

1973 Mach 1 Q code 351 4V, 9A paint, standard interior, 3.50 rear, C6 trans.
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  ignition switch Robert sneed 1 175 07-19-2018, 09:02 PM
Last Post: midlife
  Turn signal switch Robert sneed 5 215 07-10-2018, 11:33 AM
Last Post: midlife
  Backup lights issue Ryunker 6 311 06-20-2018, 08:54 AM
Last Post: Vinnie
  1973 Mustang - No brake lights skeet76 10 988 06-05-2018, 11:59 AM
Last Post: skeet76
  Headlight switch bracket Danno 1 191 04-22-2018, 04:03 PM
Last Post: Danno
  Headlight switch bezel backlight Danno 2 258 04-03-2018, 01:12 PM
Last Post: Danno
  Brake light switch and wiring shaheenk 5 413 03-18-2018, 03:56 AM
Last Post: shaheenk
  Ignition switch question Danno 3 350 02-21-2018, 09:28 PM
Last Post: Don C



Users browsing this thread: 1 Guest(s)