• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
heads and manifold
#1
is this a good deal for $300 FORD Mustang 351C 2 V Australian Heads Weiand 7516 Excelerator Intake Manifold

from what i have been reading here. without a total rebuild by adding the aussie heads, a new intake manifold and carb i can give my convertible a good increase in guts. is that all needed. I would just like a little more oomph than i am getting thanks george

of course it would be a great deal until you read at the bottom the heads weren't included sorry.
  Reply
#2
If it's $300 for just the intake it doesn't sound that great to me.

As you said, if it were $300 for the heads and intake, it would be a steal.

Doc

[Image: 6y14ea.jpg]

Project started 8-7-10
Completed: All new suspension, rebuilt 351C H Code bored .030 over with mild cam and intake, new 3.50 TracLok, custom exhaust system
Current "mini-project": interior upgrade Undecided
  Reply
#3
Sure sounds good.
The bare heads probably are worth that.
Manifold's worth a hundred.

Don't forget to factor in the cost or redoing, or at least going through and checking, the heads before installing them.
If they are OE Ford valves (logo on the chamber face of the valve), throw them away without question.

Hopefully they won't need anything else; in that case... SCORE!!

Pete - MotoArts Decals and Signs
'71 Sportsroof 351C-4V/4-speed - FINALLY under construction - no, wait, on hold again...
'90 Mustang 7-Up 5.0 ragtop, rolling beater
'66 Sunbeam Tiger Mk.IA, survivor
  Reply
#4
Yeah the Aussie 2bbl heads flow alot less hat high RPM, however at real world street RMP they are the Poo fer yer 351C. Lot'sa torque down low, where Ya need it.

Tubo
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Temp diff between heads? Vinnie 7 135 08-12-2018, 09:26 PM
Last Post: Carolina_Mountain_Mustangs
  INTAKE MANIFOLD PAPPY HAROLD 1 127 08-07-2018, 04:50 AM
Last Post: TommyK
  Great article for serious gear heads c9zx 1 162 07-24-2018, 09:25 PM
Last Post: Don C
  New camshaft time! 377 in Cleveland with CHI 2V heads. IT RUNS! Video on page 2 Bentworker 22 1,359 07-24-2018, 09:42 AM
Last Post: Bentworker
  Cracked 351 Cleveland Heads bigfoot72 29 1,279 05-26-2018, 12:37 AM
Last Post: barnett468
  Trickflow heads on 351c with flat pistons Robsweden 25 2,901 05-23-2018, 12:17 PM
Last Post: barnett468
  Underside of Intake manifold Studdley 32 939 05-05-2018, 06:21 PM
Last Post: Stanglover
  1973 351C 4V Exhaust Manifold Photos Needed Wolverine 2 602 02-26-2018, 08:45 AM
Last Post: OMS



Users browsing this thread: 1 Guest(s)