• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
289/302 Power Steering Pump Brackets Needed
#1
Gurus,

My 72's 289 Power Steering Pump is cracked and it needs to be replaced. I have my old PS pump from my 250 engine and I'm thinking it should work fine. Problem being I don't have the 2 brackets and spacers required to mount it. I believe a standard 302 setup will work fine on the 66 289 especially since I didn't change any of the hoses. Please advise if I'm wrong.

Since there are several folks on here that have upgraded to various monstrous engines and have spare parts like myself, does anyone have the mounting bracket and cradle bracket available? I'll pay shipping plus a reasonable cost or pay it forward as I've done a few times. My zip code is 22554.

Attached are pics of my 72's original I6 PS pump and the current 289 PS pump.

KR

   
   

-Former 70 & 72 Mustang Owner.
-69 Torino GT, Formal Roof, 351W, Edelbrock 600 cfm, Edelbrock 351W Performer RPM intake, headers, AOD trans, dual flowmasters w/H pipe, Pertronix II Billet, 3.5 TRACLOC g/r, 15" Magnum 500s, 100A alt, aluminum radiator, electric fan, Pro-car seats, mini-starter...owned since Dec 13.
-70 Mach 1, 351W, Edelbrock E-Street EFI, VHX instrument cluster, Hooker headers, dual flowmasters, Pertronix II, 15" Magnum 500s, 150A alt, aluminum radiator, dual electric fans, Pro-car seats, mini-starter
  Reply
#2
I will check my parts pile and get back to you
  Reply
#3
Pulley looks way off VS V8 ones

If you don't find it for free email me I sell pumps with pullies and brackets

Don
  Reply
#4
OMS;129301 Wrote:Pulley looks way off VS V8 ones

If you don't find it for free email me I sell pumps with pullies and brackets

Don

Awesome. Thanks for the replies Gentlemen. Auron had a bracket available, hopefully I don't need the whole set up. I'll let you know what we work out.

OMS;129301 Wrote:Pulley looks way off VS V8 ones

If you don't find it for free email me I sell pumps with pullies and brackets

Don

Don,

Can you give me a little more fidelity on the comment that the pulley looks way off?

KR

-Former 70 & 72 Mustang Owner.
-69 Torino GT, Formal Roof, 351W, Edelbrock 600 cfm, Edelbrock 351W Performer RPM intake, headers, AOD trans, dual flowmasters w/H pipe, Pertronix II Billet, 3.5 TRACLOC g/r, 15" Magnum 500s, 100A alt, aluminum radiator, electric fan, Pro-car seats, mini-starter...owned since Dec 13.
-70 Mach 1, 351W, Edelbrock E-Street EFI, VHX instrument cluster, Hooker headers, dual flowmasters, Pertronix II, 15" Magnum 500s, 150A alt, aluminum radiator, dual electric fans, Pro-car seats, mini-starter
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
runninpony Top Section Steering Column NOT A T5 0 127 06-23-2018, 01:57 PM
Last Post: NOT A T5
  Aftermarket Steering Wheel headaches Omie01 5 340 05-30-2018, 06:47 AM
Last Post: Pegleg
Stang Water pump replacement Plywood50 8 337 05-23-2018, 10:27 PM
Last Post: EBSTANG
runninpony Chromed/Rebuild Power Brake Booster NOT A T5 9 490 02-15-2018, 03:58 AM
Last Post: NOT A T5
  Column have to be in for dash power to work? scgamecock 4 619 12-30-2017, 05:24 PM
Last Post: midlife
  Steering column Dust seal Omie01 1 564 12-25-2017, 07:46 AM
Last Post: Omie01
  Power window problem rocro 10 1,307 12-23-2017, 05:02 PM
Last Post: kcmash
  Help!! Broken wire on steering column scgamecock 7 574 12-21-2017, 09:31 PM
Last Post: Don C



Users browsing this thread: 1 Guest(s)