• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Dash bulb feed socket
#1
Looks like I broke the metal contacts off the two wire bulb socket that feeds the dash light circuit. Anybody got one with contacts and wires still attached? Let me know.

Thanks

[Image: photo2_zps11534d4a.jpg]

73 conv. 460, D0VE large valve heads, Performer RPM manifold, Voodoo 227/233 cam, Holley 950 HP carb, C6 trans, 3.25 trak-loc.
  Reply
#2
TommyK;126653 Wrote:Looks like I broke the metal contacts off the two wire bulb socket that feeds the dash light circuit. Anybody got one with contacts and wires still attached? Let me know.

Thanks

[Image: photo2_zps11534d4a.jpg]

Yeah - I'm right there with ya. I've got 3 or 4 in mine that are either melted, broken, or just missing. Midlife pointed me toward some units at NPD, but it turns out they were the twist-in sockets for the backside of the instrument cluster.

Eric

[Image: mach1sig2.gif]
  Reply
#3
By the way, the ones I got from NPD that twist in do not work. They are slightly off and do not contact the circuit board when twisted in. Still looking for reasonable replacements...

[Image: 1673if.png]
50 F1
73 Mach 1
86 F150
96 F150
2014 F150
Always looking
  Reply
#4
Are these bulb sockets with wires coming out of the back, or are you looking for the stand-alone sockets that contact the circuit card on the back of the dash cluster?

If you need bulb sockets with wires, I have many of them, usually for a 1895 bulb. Tell me which color wires they are and I can probably get you them for $5 plus another $2 for shipping.

Let me check your shorts!
http://midlifeharness.com

[Image: Flamicon2.jpg]


[Image: oldfart.png]
  Reply
#5
midlife;126745 Wrote:Are these bulb sockets with wires coming out of the back, or are you looking for the stand-alone sockets that contact the circuit card on the back of the dash cluster?

If you need bulb sockets with wires, I have many of them, usually for a 1895 bulb. Tell me which color wires they are and I can probably get you them for $5 plus another $2 for shipping.

Yes Randy bulb socket with one black wire and one green with red stripe wire. The metal tabs that contact the circuit board appear to have broken off.

PM me your paypal address and I will send $$.

Thank you very much for your help.

Tom

73 conv. 460, D0VE large valve heads, Performer RPM manifold, Voodoo 227/233 cam, Holley 950 HP carb, C6 trans, 3.25 trak-loc.
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Want an NOS or really nice 1971-1973 Parking brake on dash light bezel, a kevken1959 0 274 12-19-2017, 09:44 PM
Last Post: kevken1959
  Driver Side Plastic Dash End Piece andy72 3 512 04-05-2017, 09:58 PM
Last Post: secluff
  WTB: Center Dash Cubby aka Map Pocket ScooterDog 6 855 06-19-2016, 07:53 PM
Last Post: secluff
  [WTB] Center Dash Bezel with Gauges sdtommy75 3 653 03-10-2016, 10:03 PM
Last Post: 71steed
  WTB 73 under dash wire harness Carolina_Mountain_Mustangs 2 593 05-22-2015, 10:00 PM
Last Post: 71steed
  In need of a dash parking light 123FRANK321 9 986 11-13-2014, 08:04 AM
Last Post: 71steed
  [WTB] WTB dash bezel for 3 gauge pod Eaton Inside 0 446 09-24-2014, 04:57 PM
Last Post: Eaton Inside
  [WTB] 71-72 Sport Grill lamp socket with wires bkdunha 1 790 05-28-2014, 06:44 PM
Last Post: midlife



Users browsing this thread: 1 Guest(s)