• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
over axle panel and full floor
#1
Hey all i recently picked up a 73 q code numbers matchng runs an moves needs quarters, trunk, and floors bu t frame is solid as well as torque boxes and frnt end and cowl. I got a trunk, quarters, drop offs, and tail pan with the car as well as floors but i thnk a whole floor is going to be easier. Any experience with one piece floors and i need the over the axle area as well. I hate to junk the car, the front is way to solid. was ivy glow with avocado Smile lol
  Reply
#2
87fox72mach;124235 Wrote:Hey all i recently picked up a 73 q code numbers matchng runs an moves needs quarters, trunk, and floors bu t frame is solid as well as torque boxes and frnt end and cowl. I got a trunk, quarters, drop offs, and tail pan with the car as well as floors but i thnk a whole floor is going to be easier. Any experience with one piece floors and i need the over the axle area as well. I hate to junk the car, the front is way to solid. was ivy glow with avocado Smile lol

Do you mean the cross member / panel the shocks bolt to? or just the sheet metal avove the panel

Full floor fit, but ribbing is wrong and has to be hammered out by the front frame extensions and under the rear seat
Couple of places need notched / trimmed
Seat patforms are wrong
Will have holes for seat bolts and drains not used in 71-3's

Ohio Mustang Supply
440-949-2556

[Image: oms_sig_banner.jpg]
  Reply
#3
OMS;124247 Wrote:
87fox72mach;124235 Wrote:Hey all i recently picked up a 73 q code numbers matchng runs an moves needs quarters, trunk, and floors bu t frame is solid as well as torque boxes and frnt end and cowl. I got a trunk, quarters, drop offs, and tail pan with the car as well as floors but i thnk a whole floor is going to be easier. Any experience with one piece floors and i need the over the axle area as well. I hate to junk the car, the front is way to solid. was ivy glow with avocado Smile lol

Do you mean the cross member / panel the shocks bolt to? or just the sheet metal avove the panel

Full floor fit, but ribbing is wrong and has to be hammered out by the front frame extensions and under the rear seat
Couple of places need notched / trimmed
Seat patforms are wrong
Will have holes for seat bolts and drains not used in 71-3's

Don -

Is there a template for these required mods? THX Ray

1971 Boss 351  
1972 Q code 4 speed convertible 
1971 Mustang Sportsroof  351-2V FMX 
1973 Mach 1 (parts car)
  Reply
#4
Right under the back seat where it goes up rihht under the rear seat belt bolt holes is rusted through
  Reply
#5
87fox72mach;124264 Wrote:Right under the back seat where it goes up rihht under the rear seat belt bolt holes is rusted through

Sounds similar to my 73 Mach. I would also like to replace the whole floor. Will anyone be reproducing the correct floor anytime soon?
  Reply
#6
IA Rider;124272 Wrote:
87fox72mach;124264 Wrote:Right under the back seat where it goes up rihht under the rear seat belt bolt holes is rusted through

Sounds similar to my 73 Mach. I would also like to replace the whole floor. Will anyone be reproducing the correct floor anytime soon?

Maybe someday but not now. Post up a thread under the introduction section so we can greet you properly.

[Image: 2rr7aiv.png]

Just cruising along minding our own business when BAM!!! The LAWS show up.
  Reply
#7
IA Rider;124272 Wrote:
87fox72mach;124264 Wrote:Right under the back seat where it goes up rihht under the rear seat belt bolt holes is rusted through

Sounds similar to my 73 Mach. I would also like to replace the whole floor. Will anyone be reproducing the correct floor anytime soon?

I doubt they will do a complete 71-3 floor

For most people these work well

Item #215494H/I
71-73 FLOOR PANS, FULL PAIR
Correct ribbing reproduction full floor pans. Pair, right and left. Save on shipping when purchasing a pair. Price: $184.95

Ohio Mustang Supply
440-949-2556

[Image: oms_sig_banner.jpg]
  Reply
#8
I have those and may end up using them im just concerned about the area under back seat
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Dash end panel oddity Pegleg 2 204 07-03-2018, 10:55 AM
Last Post: donkost
  71 Mach 1 floor mats jowens1126 8 469 06-02-2018, 03:06 PM
Last Post: Mister 4x4
runninpony TMI Seat Covers Full Set NOT A T5 5 419 03-24-2018, 10:46 AM
Last Post: kcmash
runninpony TMI Seat Covers Full Set NOT A T5 2 354 03-11-2018, 03:35 AM
Last Post: NOT A T5
  Mustang II door panel Studdley 5 431 03-03-2018, 08:46 PM
Last Post: secluff
  Plastic Pieces - Honeycomb grille, panel, fan shroud, etc. ITMike5.0 14 851 02-04-2018, 03:05 PM
Last Post: Carolina_Mountain_Mustangs
  Missing front dashboard panel Speedpro71 7 1,050 12-18-2017, 08:23 PM
Last Post: SVO2SCJ
  Honeycomb Tail light panel jowens1126 8 775 07-21-2017, 10:03 PM
Last Post: Carolina_Mountain_Mustangs



Users browsing this thread: 1 Guest(s)