• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Where to buy complete rebuilt 351C ?
#1
Where do I find rebuilt 351 Clevelands ?
I want to rebuild mine but getting a rebuilt-ready to use would be very cool.
  Reply
#2
You can buy a long block from Autozone for between $1400-1600. While the price is good and a warranty applies , I prefer to have a closer reign on what work and build quality I am getting--so I tend to do my own. The last one I bought as a short block was bored and honed without torque plates, so cylinder wear was uneven. Despite that, it did run OK and I never blew it up.

[Image: 4zw1hv.png]
Dave

1931 Ford Model A Station Wagon
1969 Mach 1 - 351C, TKO-600, 4WDB, R&P, A/C, Shaker, Fold Down, etc.
1972 Mach 1 - 351C, FMX, PDB, PS, A/C, Fold Down, Console
1996 Mustang Cobra Convertible - 10psi Procharger
  Reply
#3
Here's a place.

http://www.tuffdawgengines.com/ford%20modified.htm

http://proformanceunlimited.com/

-jbojo

-john
(jbojo)
351C 4V cc heads, 10.5 : 1 CR, 290 Herbert cam, Flat top forged pistons, forged connecting rods, Atomic efi,
C6 with Gear Vendor overdrive, 3.89 Tru Trac, Hooker Super Comp with 2 1/2" Pypes Exhaust.        

Some Mod pictures can be seen at:

  Reply
#4
Danbury Competition Engines in CT
  Reply
#5
There's one sitting in the engine bay of my 'vert but I'm afraid I couldn't part with it at this time. Big GrinBig Grin

Doc the Smartass

Doc

[Image: 6y14ea.jpg]

Project started 8-7-10
Completed: All new suspension, rebuilt 351C H Code bored .030 over with mild cam and intake, new 3.50 TracLok, custom exhaust system
Current "mini-project": interior upgrade Undecided
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  1973 351C vacuum lines and eventual other questions scottyrocks 14 288 08-12-2018, 11:53 AM
Last Post: Don C
  Correct 351C Power Steering Hoses? street rod mach 1 7 207 08-12-2018, 08:26 AM
Last Post: NOT A T5
  351c cam lobe ID. Have to measure lift Ryunker 8 294 07-23-2018, 06:04 PM
Last Post: Ryunker
  351c vs 351w Tnfastbk 11 5,906 07-14-2018, 02:57 AM
Last Post: MissingNo.
  Holley Sniper on a 351c Fabrice 45 5,451 07-01-2018, 01:54 PM
Last Post: Fabrice
  1971 351c m-code engine Meyer 8 496 06-23-2018, 06:14 PM
Last Post: keiths71
  351C M-Code engine Timing issue! Meyer 25 863 06-17-2018, 08:41 AM
Last Post: Stanglover
  Trickflow heads on 351c with flat pistons Robsweden 25 2,974 05-23-2018, 12:17 PM
Last Post: barnett468



Users browsing this thread: 1 Guest(s)