• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Hydrualic clutch
#1
Is anyone running one with a top loader and if so where did you get it?
  Reply
#2
ANYONE?
  Reply
#3
(01-13-2011, 09:17 AM)Tnfastbk Wrote: ANYONE?

CJ Pony Parts shows one for 1970. You might contact them to see if it might work. Kind of pricey at $300.00 plus. You can strengthen the Z bar, build a heim jointed clutch rod, and rollerize the pedal for less and be bullet proof. That set up has been on my Cougar for 15 plus years.

Good Luck,
Chuck
  Reply
#4
I bought a McLeod hydraulic throwout bearing, sleeve, and spacer for my toploader in my '69. I ended up not using the toploader, but coincidentally, the same parts were what I needed for a TKO600. So, I pieced my own setup together. I bought a 3/4" master cylinder and small reservoir at a off road supply shop locally, and the McLeod release bearing, sleeve, and spacer from PAW (also somewhat local), and had to get some hoses which I had made at Torino Motor Racing (also local). This setup allowed me to run headers with a 351C without interference of the release arm as I no longer have a release arm.

Since I did all that, a number of kits have cropped up that you can buy. I think in total I spent about $400, maybe slightly more. If you need part numbers on any of this, let me know--happy to help.

[Image: 4zw1hv.png]
Dave

1931 Ford Model A Station Wagon
1969 Mach 1 - 351C, TKO-600, 4WDB, R&P, A/C, Shaker, Fold Down, etc.
1972 Mach 1 - 351C, FMX, PDB, PS, A/C, Fold Down, Console
1996 Mustang Cobra Convertible - 10psi Procharger
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Best hydraulic clutch master cylinder solution?? GonHuntin 21 393 08-16-2018, 12:20 PM
Last Post: GonHuntin
  Do 69-70 clutch and brake pedals fiit 71-73 bracket? Stanglover 4 220 08-06-2018, 01:01 PM
Last Post: Stanglover
  MDL clutch pedal and cable set up 73pony 6 235 07-26-2018, 01:47 PM
Last Post: tony-muscle
  Clutch suggestion 73pony 3 289 07-14-2018, 11:10 AM
Last Post: c9zx
  Clutch- what have I done digithead 44 1,293 06-01-2018, 12:07 PM
Last Post: Jeff73Mach1
  clutch spring boilermaster 1 247 05-26-2018, 05:47 AM
Last Post: 71 gbvert
  clutch pedal yellowmach351 8 563 05-03-2018, 09:53 PM
Last Post: Studdley
  Hydraulic Clutch Studdley 2 277 04-17-2018, 08:48 PM
Last Post: Studdley



Users browsing this thread: 1 Guest(s)