7173MUSTANGS.com
WTB Trunk Floor Patch & Gas Tank 73 - Printable Version

+- 7173MUSTANGS.com (https://www.7173mustangs.com)
+-- Forum: Market Place (https://www.7173mustangs.com/forum-market-place)
+--- Forum: Classifieds (https://www.7173mustangs.com/forum-classifieds)
+---- Forum: Want to Buy (WTB) (https://www.7173mustangs.com/forum-want-to-buy-wtb)
+---- Thread: WTB Trunk Floor Patch & Gas Tank 73 (/thread-wtb-trunk-floor-patch-gas-tank-73)

Pages: 1 2


WTB Trunk Floor Patch & Gas Tank 73 - rjpohl - 01-18-2019

The PO had cut a hole in the trunk for clearance on tank (pic 3) he used.  I'd like to just replace the middle with a patch.  Pic 1 shows the patch piece needed, pic 2 is off the hole in trunk now that would be cut to match the patch.  I also need a tank, not sure if I can find both these items from the same place.  
Shipping would be to 40228 (louisville, KY)
Please email me at bob.pohlmann@gmail.com with price.
Thanks
Bob


[Image: trunk-pan-A.jpg]
[Image: IMG-2724.jpg]

[Image: IMG-2723.jpg]


RE: WTB Trunk Floor Patch & Gas Tank 73 - Carolina_Mountain_Mustangs - 01-18-2019

The only parts car I have was hit hard in the back so trunk is trash.
I am thinking you will have to go with a Dynacorn repo and who ever is closest to you will save you shipping. Don is on the forum and can get both trunk and gas tank.
I doubt that the repo floor will be close enough to just cut the center out but you can take a piece of cardboard and make a template of the profile from your floor cut it and then check the repo floor might get lucky.
[Image: 100-2530.jpg]


RE: WTB Trunk Floor Patch & Gas Tank 73 - rjpohl - 01-18-2019

(01-18-2019, 04:08 PM)Carolina_Mountain_Mustangs Wrote: The only parts car I have was hit hard in the back so trunk is trash.
I am thinking you will have to go with a Dynacorn repo and who ever is closest to you will save you shipping. Don is on the forum and can get both trunk and gas tank.
I doubt that the repo floor will be close enough to just cut the center out but you can take a piece of cardboard and make a template of the profile from your floor cut it and then check the repo floor might get lucky.
[Image: 100-2530.jpg]
Thanks for the reply.  What a shame, that mustang was beautiful.
Bob


RE: WTB Trunk Floor Patch & Gas Tank 73 - Carolina_Mountain_Mustangs - 01-18-2019

(01-18-2019, 04:19 PM)rjpohl Wrote:
(01-18-2019, 04:08 PM)Carolina_Mountain_Mustangs Wrote: The only parts car I have was hit hard in the back so trunk is trash.
I am thinking you will have to go with a Dynacorn repo and who ever is closest to you will save you shipping. Don is on the forum and can get both trunk and gas tank.
I doubt that the repo floor will be close enough to just cut the center out but you can take a piece of cardboard and make a template of the profile from your floor cut it and then check the repo floor might get lucky.
[Image: 100-2530.jpg]
Thanks for the reply.  What a shame, that mustang was beautiful.
Bob

It was a sad day when I picked it up. He ordered the car new, one owner, dated in the car got married in the car. He raised two boys in the car and they drove it in his funeral procession. One of the sons was out and someone ran into the rear and knocked it into another car. Had just had the top put on, had heads pulled and valve job, ceramic coated headers and dual Pypes stainless exhaust installed. It still rand and drove. Great parts car but not worth fixing. Was really rare MM did a center story about this model 351 2-V with three speed they only made 82 of them.


RE: WTB Trunk Floor Patch & Gas Tank 73 - arursini - 01-18-2019

I may be able to assist you....I have a trunk pan that I cut out --in 2 pieces that could be welded and seamed as one....and a used tank from my 73 Mach 1 in great condition.....

Let me know if you are interested and I can get some pics....


Anthony


RE: WTB Trunk Floor Patch & Gas Tank 73 - rjpohl - 01-18-2019

(01-18-2019, 07:23 PM)arursini Wrote: I may be able to assist you....I have a trunk pan that I cut out --in 2 pieces that could be welded and seamed as one....and a used tank from my 73 Mach 1 in great condition.....

Let me know if you are interested and I can get some pics....


Anthony

Pics would be great, thanks


RE: WTB Trunk Floor Patch & Gas Tank 73 - MikeGriese - 01-19-2019

I have a couple of used gas tanks to choose from. Both would clean up nicely and are from '71's. $50 shipped.

Sorry - meant plus shipping.


RE: WTB Trunk Floor Patch & Gas Tank 73 - Hemikiller - 01-19-2019

https://www.1aauto.com/1971-73-ford-mustang-fuel-tank/i/1afgt00185?f=337032&gclid=CjwKCAiAsoviBRAoEiwATm8OYPuXlE0CNtL-5wvfn0-UtsBmcWpe_khz9X88i4CdBk4gadhzSdVjyhoCaA8QAvD_BwE


RE: WTB Trunk Floor Patch & Gas Tank 73 - MikeGriese - 01-19-2019

(01-19-2019, 08:35 PM)Hemikiller Wrote: https://www.1aauto.com/1971-73-ford-mustang-fuel-tank/i/1afgt00185?f=337032&gclid=CjwKCAiAsoviBRAoEiwATm8OYPuXlE0CNtL-5wvfn0-UtsBmcWpe_khz9X88i4CdBk4gadhzSdVjyhoCaA8QAvD_BwE

Hmmm...  looks like my tanks may becoming scrap soon.


RE: WTB Trunk Floor Patch & Gas Tank 73 - jeff8877 - 01-19-2019

Here is another one...$89 shipped.

https://www.ebay.com/itm/20-Gallon-Fuel-Tank-For-71-73-Ford-Mustang-W-Lock-Ring-Kit-Silver/352217262449?hash=item5201c8e971:g:Va8AAOSwzThcIp8J:rk:1:pf:0