ram air - Printable Version

+- 7173MUSTANGS.com (https://www.7173mustangs.com)
+-- Forum: Tech Forums (https://www.7173mustangs.com/forum-tech-forums)
+--- Forum: Engine, Drivetrain and Performance (https://www.7173mustangs.com/forum-engine-drivetrain-and-performance)
+--- Thread: ram air (/thread-ram-air--32634)

ram air - 164runner - 09-10-2018

have a 408c with edelbrock air gap intake with a 1/2 spacer. if I run the top half of the ram air on the hood, will the air cleaner fit upĀ inside the hole. have a 13 inch air cleaner. have about 1/2 inch between top of wingnut to bottom of hood.
[Image: 20170122_090341.jpg]

RE: ram air - Carolina_Mountain_Mustangs - 09-10-2018

I cannot say for sure. Different combinations of engine mounts, carbs and manifolds make it impossible to say what will work. I would use clay to get accurate dimensions of clearances. You can also lay a straight edge from fender to fender and measure down to air cleaner. Never put it on an try to shut the hood you will probably dent the hood.

RE: ram air - Don C - 09-10-2018

I agree, use clay, Play-Doh works great.

RE: ram air - jpaz - 09-10-2018

Tin foil will work also

RE: ram air - 164runner - 09-11-2018

does anyone know the size of hole of the hood side of the ram air unit.

RE: ram air - Canted 393 - 09-11-2018

It should fit here is mine.