Current time: 12-05-2016, 11:37 AM Hello There, Guest! (LoginRegister)

Welcome to 7173Mustangs.com!

You are currently viewing the board as a guest. Please Register or Login for full functionality

If you registered and did not receive your email validation, please send a contact note to the admin by clicking here and filling out the short form.



 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ON TO THE PASS SIDE--PICS AS PROMISED
Author Message
Qcode351mach


[Image: CTtechScott.png]

*
Call Me a Cab

Posts: 2,864
Joined: Dec 2010
Region: Northeast
U.S.A.
Reputation: 115



A+ Writing Tutorial Coin

    Post: #1
    ON TO THE PASS SIDE--PICS AS PROMISED

    Got to the shop early this morning..Old shock tower off & fitted...Lucky when I bought the used towers (1991) It still had some of the frame rail attached..It's just the right amount to repair the rotted out section on mineTongue..Joey (my helper)where are you? time for some sandblasting !
                            
    Offline 01-15-2011 11:22 AM
    Visit this user's website Find all posts by this user Quote this message in a reply
    cobra3073


    [Image: TNsuprmod.png]

    *
    Call Me a Cab

    Posts: 2,867
    Joined: Jul 2010
    Region: South
    Memphis, TN
    Reputation: 49



    Meet and Greet 1 - 4 Air Force Original Owner Mustang Award

      Post: #2
      RE: ON TO THE PASS SIDE--PICS AS PROMISED

      Looking Good - - You are "on a roll."

      BT
      Offline 01-15-2011 12:44 PM
      Find all posts by this user Quote this message in a reply
      73vertproject


      [Image: NVtagDOC.png]

      *
      Don't Change User Title :)

      Posts: 5,076
      Joined: Aug 2010
      Region: West
      McDermitt, NV
      Reputation: 54



      Meet and Greet 1 - 4 Navy Shooter Music Note

        Post: #3
        RE: ON TO THE PASS SIDE--PICS AS PROMISED

        The project seems to be coming along very nicely. Thanks for documenting your work with the good pics! Please keep 'em coming.

        Doc
        Offline 01-15-2011 01:07 PM
        Find all posts by this user Quote this message in a reply
        Tnfastbk



        *
        I'll Lock Up

        Posts: 7,245
        Joined: Sep 2010
        Region: Southeast

        Reputation: 69



        Car of the Month Trophy Shooter

          Post: #4
          RE: ON TO THE PASS SIDE--PICS AS PROMISED

          MAn good work not gonna complain to much about the egg size hole I found in my wheel well.
          Offline 01-15-2011 08:47 PM
          Find all posts by this user Quote this message in a reply
          mach71351c



          *
          My Mail is Forwarded Here

          Posts: 5,518
          Joined: Nov 2010
          Region: Southwest
          Escondido, Ca.
          Reputation: 45



          Meet and Greet 20 - 29 Shooter

            Post: #5
            RE: ON TO THE PASS SIDE--PICS AS PROMISED

            Your a brave man to take on a full rebuild let alone a restoration. Mike
            Offline 01-15-2011 10:07 PM
            Find all posts by this user Quote this message in a reply
            Qcode351mach


            [Image: CTtechScott.png]

            *
            Call Me a Cab

            Posts: 2,864
            Joined: Dec 2010
            Region: Northeast
            U.S.A.
            Reputation: 115



            A+ Writing Tutorial Coin

              Post: #6
              RE: ON TO THE PASS SIDE--PICS AS PROMISED

              (01-15-2011 10:07 PM)mach71351c Wrote:  Your a brave man to take on a full rebuild let alone a restoration. Mike
              Thanks Mike & all the others for the words of encourgement ! Funny, when I was shopping around to shops in 2004 to have the structual work done almost every shop said I was wasting my time & the car was a basket case..Basket case my A** Theres two shops that I can't wait to drive this car in there & show them how wrong they were..I'm the type of guy that when someone tells me I can't repair some thing I just have to prove them wrong !! & belive me after 20 plus years in the A/B business I've proven many a person wrong !Cool
              Offline 01-15-2011 11:51 PM
              Visit this user's website Find all posts by this user Quote this message in a reply
              mach71351c



              *
              My Mail is Forwarded Here

              Posts: 5,518
              Joined: Nov 2010
              Region: Southwest
              Escondido, Ca.
              Reputation: 45



              Meet and Greet 20 - 29 Shooter

                Post: #7
                RE: ON TO THE PASS SIDE--PICS AS PROMISED

                (01-15-2011 11:51 PM)Qcode351mach Wrote:  
                (01-15-2011 10:07 PM)mach71351c Wrote:  Your a brave man to take on a full rebuild let alone a restoration. Mike
                Thanks Mike & all the others for the words of encourgement ! Funny, when I was shopping around to shops in 2004 to have the structual work done almost every shop said I was wasting my time & the car was a basket case..Basket case my A** Theres two shops that I can't wait to drive this car in there & show them how wrong they were..I'm the type of guy that when someone tells me I can't repair some thing I just have to prove them wrong !! & belive me after 20 plus years in the A/B business I've proven many a person wrong !Cool
                Right on. My brother worked at Car land auto body in Danbury and New Milford auto body. New Milford auto body painted my 71 Grandé back in 87. Were ether one the shop said your wasting your time. Mike


                Attached File(s) Thumbnail(s)
                   
                Offline 01-16-2011 12:47 AM
                Find all posts by this user Quote this message in a reply
                Qcode351mach


                [Image: CTtechScott.png]

                *
                Call Me a Cab

                Posts: 2,864
                Joined: Dec 2010
                Region: Northeast
                U.S.A.
                Reputation: 115



                A+ Writing Tutorial Coin

                  Post: #8
                  RE: ON TO THE PASS SIDE--PICS AS PROMISED

                  Right on. My brother worked at Car land auto body in Danbury and New Milford auto body. New Milford auto body painted my 71 Grandé back in 87. Were ether one the shop said your wasting your time. Mike


                  Nice Grandé..Mike ,I had one of those too ! I will have to dig out my pics..No neither shop is local, one was in manchester the other was in N.milford but it's not N.milford A/B. Carland is still around & I knew the owner Art, I havn't seen him in years. The last time I was in there had to be around 2000 when I spent a year doing some apprisal work after I sold my shop..I still keep my apprisal license current. I did work at Andys auto coach works from 88 to 90 By the way my last shop I sold is still in business just the way I left it. Heres the shop I sold
                  http://www.eurotechautobodyinc.com/services.html
                  Offline 01-16-2011 08:45 AM
                  Visit this user's website Find all posts by this user Quote this message in a reply
                  mach71351c



                  *
                  My Mail is Forwarded Here

                  Posts: 5,518
                  Joined: Nov 2010
                  Region: Southwest
                  Escondido, Ca.
                  Reputation: 45



                  Meet and Greet 20 - 29 Shooter

                    Post: #9
                    RE: ON TO THE PASS SIDE--PICS AS PROMISED

                    (01-16-2011 08:45 AM)Qcode351mach Wrote:  Right on. My brother worked at Car land auto body in Danbury and New Milford auto body. New Milford auto body painted my 71 Grandé back in 87. Were ether one the shop said your wasting your time. Mike


                    Nice Grandé..Mike ,I had one of those too ! I will have to dig out my pics..No neither shop is local, one was in manchester the other was in N.milford but it's not N.milford A/B. Carland is still around & I knew the owner Art, I havn't seen him in years. The last time I was in there had to be around 2000 when I spent a year doing some apprisal work after I sold my shop..I still keep my apprisal license current. I did work at Andys auto coach works from 88 to 90 By the way my last shop I sold is still in business just the way I left it. Heres the shop I sold
                    http://www.eurotechautobodyinc.com/services.html
                    Nice shop my brother and I both went to Abbott tech I took auto and my brother took auto body. My brother worked for Art R a few times in the late 70s and 1980s. My brother said he got his talent from Car land. He's been doing apprisal work for past 15 years now he's a ester mater at a shop here in Escondido CA. Mike
                    Offline 01-16-2011 01:43 PM
                    Find all posts by this user Quote this message in a reply
                    droptop73


                    [Image: MItagJeff.png]

                    *
                    I'll Lock Up

                    Posts: 5,703
                    Joined: Jul 2010
                    Region: North
                    Grand Rapids, MI
                    Reputation: 39



                    Meet and Greet 10 - 14 Shooter

                      Post: #10
                      RE: ON TO THE PASS SIDE--PICS AS PROMISED

                      Nice work Q
                      Offline 01-16-2011 02:16 PM
                      Find all posts by this user Quote this message in a reply



                      Possibly Related Threads...
                      Thread Author Replies Views Last Post
                        PICS-PICS-PICS 410 OF THEM ! Qcode351mach 15 2,578 11-25-2015 01:37 PM
                      Last Post: DK73
                        CUSTOM HOOD ON THE CAR--PICS Qcode351mach 24 4,737 10-04-2014 03:01 PM
                      Last Post: Finmach
                        MORE FLOOR PAN WORK--PICS Qcode351mach 12 2,527 08-23-2013 11:22 AM
                      Last Post: Qcode351mach
                        TORQUE BOX PATCH Pics Qcode351mach 3 2,582 08-19-2013 07:29 AM
                      Last Post: luxstang
                        TODAYS PICS...HOOD WORK Qcode351mach 16 2,769 01-20-2013 08:48 AM
                      Last Post: Don65Stang
                        TAKE A LOOK--PICS Qcode351mach 21 2,664 01-15-2013 10:56 PM
                      Last Post: 71_resurrection
                        PICS-- MORE PROGRESS Qcode351mach 16 1,901 01-11-2013 10:36 AM
                      Last Post: caspianwendell
                        GOT SOME PRIMER ON--PICS Qcode351mach 13 1,264 01-11-2013 05:48 AM
                      Last Post: TommyK



                      User(s) browsing this thread: 1 Guest(s)