Current time: 12-05-2016, 11:36 AM Hello There, Guest! (LoginRegister)

Welcome to 7173Mustangs.com!

You are currently viewing the board as a guest. Please Register or Login for full functionality

If you registered and did not receive your email validation, please send a contact note to the admin by clicking here and filling out the short form.



 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
73 Mach 1 - turn signal lense and backing reproduced yet? headlight alum piece too?
Author Message




Unregistered

 

    Post: #1
    73 Mach 1 - turn signal lense and backing reproduced yet? headlight alum piece too?

    ok the mustang is in primer and about to be painted. i am scavenging around for a few piece that definately need replacing on the car. one of the few things is the turn signal lense and the backing. one of the backing part is broken at the back and the other side has a broken lense. i can't find where people reproduced these yet.

    also, i am missing those big square alumium looking things that goes onto the grill and fits around the headlight. anybody know where i can get one or at least a good used one?

    any help would be appreciated guy. i'm trying to find a 73 mach 1 grill with all the accessories.
    01-13-2011 04:49 PM
    Quote this message in a reply
    Nance



    *
    One Too Many

    Posts: 1,289
    Joined: Jul 2010
    Region: Southeast
    Selma Al
    Reputation: 12



    Shooter

      Post: #2
      RE: 73 Mach 1 - turn signal lense and backing reproduced yet? headlight alum piece too?

      Give Ohio mustang supply a yell or one of the other supports of this fine forum see ads above.
      Offline 01-13-2011 04:51 PM
      Find all posts by this user Quote this message in a reply




      Unregistered

       

        Post: #3
        RE: 73 Mach 1 - turn signal lense and backing reproduced yet? headlight alum piece too?

        looked at every website i can think of but nobody carries the turn signal lense or the backing. the backing i wouldn't mind just getting a good oem part but the lense is no good on finding it.

        its good to know that there is at least 1 carrier for all of our side markets though.

        the headlight alum piece will definately need to be an OEM part.
        01-13-2011 05:14 PM
        Quote this message in a reply
        cobra3073


        [Image: TNsuprmod.png]

        *
        Call Me a Cab

        Posts: 2,867
        Joined: Jul 2010
        Region: South
        Memphis, TN
        Reputation: 49



        Meet and Greet 1 - 4 Air Force Original Owner Mustang Award

          Post: #4
          RE: 73 Mach 1 - turn signal lense and backing reproduced yet? headlight alum piece too?

          I believe you are referring to the headlight door when you talk of the Aluminum piece around the headlight.

          I would think that Motor City Mustang may have it; if not, check back with me as I may have a couple from a Mach I that I took parts off a couple of years ago. The problem for me is that it would be in the attic of my garage and it s COLD out there right nowSmile.

          BT
          Offline 01-13-2011 05:30 PM
          Find all posts by this user Quote this message in a reply
          coilwire



          *
          Practically Family

          Posts: 685
          Joined: Nov 2010
          Region: Not Selected
          Rochelle,Il
          Reputation: 10


            Post: #5
            RE: 73 Mach 1 - turn signal lense and backing reproduced yet? headlight alum piece too?

            I got my new taillight assemblies and headlight door from NPD.
            71-73 body tail ligh housing part #13434-5a; seal 13520=1, lens 13450-7a.
            headligh door 13064-9a.
            The price was reasoniable, and the fitment was real good. you will hace to paint them for 71-72 though.
            Hopes this helps.
            Jim
            Offline 01-13-2011 06:00 PM
            Find all posts by this user Quote this message in a reply




            Unregistered

             

              Post: #6
              RE: 73 Mach 1 - turn signal lense and backing reproduced yet? headlight alum piece too?

              (01-13-2011 06:00 PM)coilwire Wrote:  I got my new taillight assemblies and headlight door from NPD.
              71-73 body tail ligh housing part #13434-5a; seal 13520=1, lens 13450-7a.
              headligh door 13064-9a.
              The price was reasoniable, and the fitment was real good. you will hace to paint them for 71-72 though.
              Hopes this helps.
              Jim


              alright, i see them on their website catalog. no picture but i believe from the wording it is them. i also found them on ebay for a used set. however, still can't find the FRONT turn signal lense.
              01-13-2011 06:30 PM
              Quote this message in a reply
              Tnfastbk



              *
              I'll Lock Up

              Posts: 7,245
              Joined: Sep 2010
              Region: Southeast

              Reputation: 69



              Car of the Month Trophy Shooter

                Post: #7
                RE: 73 Mach 1 - turn signal lense and backing reproduced yet? headlight alum piece too?

                Offline 01-13-2011 08:09 PM
                Find all posts by this user Quote this message in a reply




                Unregistered

                 

                  Post: #8
                  RE: 73 Mach 1 - turn signal lense and backing reproduced yet? headlight alum piece too?

                  (01-13-2011 08:09 PM)Tnfastbk Wrote:  http://www.ohiomustang.com/store/item_li...&p=3&ps=10

                  oh wow, those are cheaper from what else i've found. but still not what i'm looking for. those are the side marker lights.

                  what i need is the verticle white lights on the grill. the lights that turn yellow behind a white lense when we turn on the turn signals.
                  01-13-2011 08:33 PM
                  Quote this message in a reply
                  Tnfastbk



                  *
                  I'll Lock Up

                  Posts: 7,245
                  Joined: Sep 2010
                  Region: Southeast

                  Reputation: 69



                  Car of the Month Trophy Shooter

                    Post: #9
                    RE: 73 Mach 1 - turn signal lense and backing reproduced yet? headlight alum piece too?

                    (01-13-2011 08:33 PM)xoliex Wrote:  
                    (01-13-2011 08:09 PM)Tnfastbk Wrote:  http://www.ohiomustang.com/store/item_li...&p=3&ps=10

                    oh wow, those are cheaper from what else i've found. but still not what i'm looking for. those are the side marker lights.

                    what i need is the verticle white lights on the grill. the lights that turn yellow behind a white lense when we turn on the turn signals.

                    These are yellow sorry
                    http://www.ohiomustang.com/store/item_li...rt%20Lamps
                    Offline 01-13-2011 08:42 PM
                    Find all posts by this user Quote this message in a reply




                    Unregistered

                     

                      Post: #10
                      RE: 73 Mach 1 - turn signal lense and backing reproduced yet? headlight alum piece too?

                      (01-13-2011 08:42 PM)Tnfastbk Wrote:  
                      (01-13-2011 08:33 PM)xoliex Wrote:  
                      (01-13-2011 08:09 PM)Tnfastbk Wrote:  http://www.ohiomustang.com/store/item_li...&p=3&ps=10

                      oh wow, those are cheaper from what else i've found. but still not what i'm looking for. those are the side marker lights.

                      what i need is the verticle white lights on the grill. the lights that turn yellow behind a white lense when we turn on the turn signals.

                      These are yellow sorry
                      http://www.ohiomustang.com/store/item_li...rt%20Lamps

                      for many years they had a 73 mach 1 grill but not for a 71-72. but nowadays, they have he reproduced 71-72 turn signals lights housings. so nobody has the 73's huh? i'm still looking late into the night however.
                      01-13-2011 11:21 PM
                      Quote this message in a reply



                      Possibly Related Threads...
                      Thread Author Replies Views Last Post
                        Side Marker Lights Lense Removal & Restoration 4mm 4 193 11-26-2016 01:42 PM
                      Last Post: 4mm
                        Mach 1 rear fidreglass quarter trim scgamecock 1 174 09-29-2016 02:19 PM
                      Last Post: asusnz
                        Glove box issues on 73 Mach 1 OneAngryDwrf 5 304 06-30-2016 10:07 PM
                      Last Post: OneAngryDwrf
                        1973 Mach 1 Interior Seat Material Oddity? Steve73QMach1 169 13,772 06-07-2016 09:19 PM
                      Last Post: Carolina_Mountain_Mustangs
                        1971 Mach 1 Carpet Install jas280z 11 722 03-27-2016 11:04 AM
                      Last Post: mach71351c
                        Headlight switch knob 73429mach 8 860 10-17-2015 12:50 PM
                      Last Post: secluff
                        Trim piece above glove box question 73429mach 3 505 10-15-2015 08:14 PM
                      Last Post: PADave
                        One and two-piece carpet for Mach 1 tony-muscle 3 542 09-28-2015 10:58 AM
                      Last Post: tony-muscle



                      User(s) browsing this thread: 1 Guest(s)