Search results

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. R

    9 inch ratio - 3.25 or 3.55?

    Hello Everyone, I hope you all had a great Thanksgiving. Here's another update on this project. The axle is all hooked up and currently going thru a gentle break-in as requested by the builder. So far, very quiet, and feels better off the line, but really not hammering it until broken in...
  2. R

    Rear seating for Sportsroof

    Hello Hemikiller, Sorry for the delay in replying, I appreciate the insight. I figured I was not going to be that lucky, nothing's easy on these when you are missing parts. I'll move forward and order the Sportsroof upholstery kit, get the front seats redone, and find the back seat...
  3. R

    Rear seating for Sportsroof

    Hi all, I'm looking into getting a new upholstery set for my 1971 Sportsroof. However, I'm need of some info. In regards to my poor 1971 Sportsroof back seat area. All of the seat, trim, and supporting sheet metal was removed before I got the car. Metal parts were totally hacked out. I think...
  4. R

    9 inch ratio - 3.25 or 3.55?

    All, After much dealing with other things to do involving my homeowners insurance and impending cancellation, and then once past that dealing with new "must-do stuff" that came along, I got back onto this project. I received the rebuilt rear axle <mostly> ready to install, and the sat on the...
  5. R

    Needed help with my roof repair, it was weak and had an oil canny feel. I think I have it solved, now.

    I have similar issues on my Sportsroof, previous owner carried heavy gear strapped to the roof, so the center support is bent down over an inch. Was thinking of doing something like this to stiffen it up: https://www.jefflilly.com/build-project/1971-mustang/71-mustang-roof-support/ And if you...
  6. R

    Manual drum to power disc

    Are you asking if you should archive the old parts you have removed for a future owner who might want to restore the car back to original? I don't know what 71-72 Mustang value crowd would say. It may be a selling point. I know the Vette and Chevelle SS crowds hang onto all kinds of random...
  7. R

    9 inch ratio - 3.25 or 3.55?

    All, Going with the 3.25's, I will be updating the builder today and moving this forward. Thank you all again for your assistance and input. I'll reach if there are any other questions or if I get any inprocess updates. Best regards, Tom
  8. R

    9 inch ratio - 3.25 or 3.55?

    Hi All, Finally some data. Trans is tagged RUG E3, so 1969 wide ratio. This probably accounts for the car feeling acceptable of the line with the 3.00 rear it currently has. Tires I am currently running are 215/65-15 at approximately 26" tall. If I changed tire size I'd probably stay in the...
  9. R

    9 inch ratio - 3.25 or 3.55?

    All, thank you for your input and check points. I'm going to look for an ID tag on the trans, in absence of that I will see if I can figure first gear ratio by rotate crank, count trans output rotation. Based on I-net info, looks like the trans from that '69 Cougar should be a 2.78 first, so...
  10. R

    9 inch ratio - 3.25 or 3.55?

    Hi All, I have an opportunity to get the spare 9 inch rear axle i have been hanging onto for my Sportsroof rebuilt at a good price, and need to decide on a gear ratio for it. The car is not a racer, it's a mild 351W/4 speed currently with a 3.00 ratio in it now, which has been fine, but as long...
  11. R

    Feedback on new AC/Heater boxes

    I understand now, didn't note that on their site.
  12. R

    Feedback on new AC/Heater boxes

    Hello Bobby, I checked the Classic Air site, there was a link their Original Air site, which will restore one, but doesn't sell outright. Mine is too horked up to use for a rebuild/restore. I'm giving it a go to buy the ACP box, should be shipping soon. Once I receive it I'll try to give a...
  13. R

    Feedback on new AC/Heater boxes

    Hi All, Getting back to work on my Mustang projects, one of the three I need to tackle is getting a new HVAC box installed in my 71 Fastback. The box in the car is very weathered, and the movable doors inside were rusted in place, gentle persuasion broke the fiberglass at the pivots. So need a...
  14. R

    Riverside, California - recommended convertible top replacement shops?

    Hello RC, Thank you for the referral, if no one has any recommendations for a closer shop I will give Jose a call. Tom
  15. R

    Riverside, California - recommended convertible top replacement shops?

    Hi All, Trying to get back to work on my projects, one of the three I need to tackle is getting a new top installed on my 71. I have noted here that E-Z ON and Kee are recommended vendors. Does anyone have any other vendor names? Also, I am going to farm this out. Does anyone in the Riverside...
  16. R

    Strut Rod Sleeve Removal

    Is the "sleeve" they are referring to the one that comes in some bushing/washer/sleeve kits? Those sleeves, if supplied and used, can attach themselves to the rod and look like part of the rod, changing the outside diameter.
  17. R

    Dual Exhaust Kits - what fits?

    Hello All, i'm sorry I never updated this thread, life and everything that has to do with it so often gets in the way. I thought i'd get this done in February, heh, didn't happen until June and July. and I was still dealing with one portion into the Fall! Anyway, I finally installed the...
  18. R

    longer wheel studs

    Hi all, i'm sorry I never replied to the above query. Life and everything that has to do with it so often gets in the way. I was never able to find any longer stud that is a press in, one shot deal. All require some sort of machining or handling, and I haven't the time for that. So I have...
  19. R

    Dual Exhaust Kits - what fits?

    Hello All, Happy New Year. Between my originally inquiring and now, the end of the year slammed me at work, I had ordered and then cancelled the Pypes kit, and then was busy with the Holidays. Sorry for the delay in getting back to this thread, Based on input here and elsewhere on the 'Net and...
  20. R

    Dual Exhaust Kits - what fits?

    Hello, trying to get some projects moving, a big one is getting a dual exhaust kit for my 71 fastback with a 351W and a manul trans. I am looking at the Pypes system, #SFM04S, which sates it is a specific fit for the 71-73 year cars. I was also considering the Flowmaster system for a 1970...
Back
Top